Replacement for American Standard 023529-0070A 47mm Cartridge
47mm ceramic disc mixing cartridge for American Standard Ceramix, Reliant+, Aquarian and Electromix single-handle valves and faucets.
Replaces these part numbers
| OEM part numbers | Aftermarket equivalents |
|---|---|
| American Standard 023529-0070A American Standard 023529-0070A/H (tub and shower package) American Standard 23529-70A (older form) | Danco AM-11 (18826B) Kissler 23529-0070A |
Will it fit?
Fits
- American Standard Ceramix, Reliant+, Aquarian and Electromix single-handle tub and shower valves
- American Standard Ceramix 2000 series lavatory faucets
- American Standard Reliant+ 4205 kitchen and 7385 lavatory faucets
- American Standard Colony Soft 4175 and Jardin 4184 kitchen faucets
- American Standard R120, R125 and R127 Reliant tub and shower rough valves
Not compatible with
- The M952100-0070A pressure balancing unit in the same tub and shower body (sold separately)
- The A954440-0070A cartridge in R110 and R115 bodies (Danco 10469)
- 051337-0070A, 994053-0070A and 951470-0070A cartridges
- Three-handle stem valves
Is this your part?
Pull the handle and cap and look for a white round cartridge held by two screws, with three rubber seals on the underside and a short brass stem with a rotation stop on top. Measure it: this one is 47 mm across.
When to replace it
The spout or showerhead keeps dripping with the handle off, water weeps around the handle base, the handle has gone stiff or gritty, or the mix will not hold steady between hot and cold.
Specifications
| FourHome part | 4H5478320AXC |
|---|---|
| UPC | 850054895806 |
| Body diameter | 47 mm |
| Overall length | About 2-1/2 in. |
| Ports | Three, with rubber seals fitted |
| Materials | White engineered polymer housing, ceramic discs, brass stem, rubber seals |
What is in the box
- 1 ceramic disc cartridge with port seals fitted
- Handle, screw, trim and pressure balancing unit not included
How to install it
Time: 15 to 20 minutes. Tools: Phillips screwdriver, Hex key for the handle screw, Silicone grease.
- Shut off the water and bleed the line.
- Pull the handle, cap and escutcheon.
- Note which way the old stop ring points, then back out the two cartridge screws and lift the cartridge straight up.
- Grease the port seals and seat the new cartridge flat in the same orientation, or hot and cold run backwards.
- Tighten both screws evenly.
- Run the valve through its full travel and check for drips before the trim goes back.
Questions
Does it fix temperature swings when a toilet flushes?
No. That is the pressure balancing unit in the same body (M952100-0070A), a separate part.
Is 023529-0070A/H a different cartridge?
No. The /H suffix is the tub and shower package. The cartridge is the same.
Is it the same as Danco 10469?
No. Danco 10469 is the A954440-0070A pressure balance cartridge, a different part. This one serves the same repair as Danco AM-11 (18826B).
Related parts
Repair guides
FourHome is not affiliated with or endorsed by any faucet manufacturer. Brand names and part numbers are used only to identify compatibility.