Replacement for Kohler GP1092204 and GP1092203 Cartridge Pair
Hot and cold quarter-turn ceramic disc cartridges for Kohler widespread bathroom faucets built after January 1, 2012. Rebuild both sides in one visit.
Replaces these part numbers
| OEM part numbers | Aftermarket equivalents |
|---|---|
| Kohler GP1092204 (hot) Kohler GP1092203 (cold) | n/a |
Will it fit?
Fits
- Both sides of Kohler widespread bathroom faucets K-107, K-108, K-394, K-454, K-11076, K-13132, K-14406, K-14661, K-16102 and K-45102, built after January 1, 2012
Not compatible with
- Cartridges for Kohler GP1152349 and GP1152350 (15mm centerset style)
- Valves for Kohler GP76671, GP76672, GP77005-RP and GP77006-RP
- Kitchen faucet models K-117, K-118, K-147, K-148, K-7825 and K-12230, which take other valves
Is this your part?
Take off one handle and the bonnet and lift the cartridge out. Match a black plastic cartridge about 2-3/4 in. long with a brass-tipped splined stem, a hex top and a two-port base. A cartridge with a blue seal at the base and a threaded brass retainer nut is the 15mm centerset style, a different part.
When to replace it
One or both handles drip, weep around the base, turn stiff or will not shut off fully. Hot and cold cartridges age together, so rebuilding both sides at once saves a second visit.
Specifications
| FourHome part | 4H1315117HC |
|---|---|
| UPC | 850054895622 |
| Pieces | 1 hot cartridge, 1 cold cartridge |
| Overall length | About 2-3/4 in. each |
| Valve | Quarter-turn ceramic disc |
| Construction | Black plastic body, brass-tipped splined stem |
| Certification | NSF/ANSI/CAN 372 lead free, IAPMO R&T |
What is in the box
- 1 hot cartridge
- 1 cold cartridge
- 2 black spline caps
- Handles, bonnets and trim not included
How to install it
Time: About 35 minutes for both sides. Tools: Screwdriver, Adjustable wrench.
- Shut both supply stops under the sink and open the faucet to bleed pressure.
- Work one side at a time so the hot and cold cartridges do not get mixed up.
- Remove the handle and bonnet, unthread the old cartridge by its hex and lift it out.
- Drop in the matching new cartridge with the spline cap aligned and thread it down snug. Do not overtighten.
- Refit the bonnet and handle, then repeat on the other side.
- Open the stops and test both sides for a full shutoff.
Questions
Why buy the pair?
The hot and cold cartridges are not interchangeable because the ceramic disc clocking is different. The pair has one of each, and both sides usually wear at the same time.
How do I keep the sides straight?
The packaging marks each cartridge hot or cold. Do one side at a time.
Is it lead free?
Yes. Both cartridges are certified by IAPMO R&T to NSF/ANSI/CAN 372, the lead-free standard for faucets that deliver drinking water.
Can I buy just one side?
Yes. FourHome sells the hot (replacement for Kohler GP1092204) and the cold (replacement for Kohler GP1092203) separately.
Related parts
Repair guides
FourHome is not affiliated with or endorsed by any faucet manufacturer. Brand names and part numbers are used only to identify compatibility.