Replacement for Kohler GP1092204 Hot Cartridge
Hot side quarter-turn ceramic disc cartridge for Kohler widespread bathroom faucets built after January 1, 2012. About 2-3/4 in. long, with a black spline cap.
Replaces these part numbers
| OEM part numbers | Aftermarket equivalents |
|---|---|
| Kohler GP1092204 (hot) | n/a |
Will it fit?
Fits
- The hot side of Kohler widespread bathroom faucets K-107, K-108, K-394, K-454, K-11076, K-13132, K-14406, K-14661, K-16102 and K-45102, built after January 1, 2012
Not compatible with
- The cold side, which takes the replacement for Kohler GP1092203 (sold separately)
- Cartridges for Kohler GP1152349 and GP1152350 (15mm centerset style)
- Valves for Kohler GP76671, GP76672, GP77005-RP and GP77006-RP
- Kitchen faucet models K-117, K-118, K-147, K-148, K-7825 and K-12230, which take other valves
Is this your part?
Shut the water, take off the hot handle and bonnet, and lift the cartridge out. Match a black plastic cartridge about 2-3/4 in. long with a brass-tipped splined stem, a hex top and a two-port base. A cartridge with a blue seal at the base and a threaded brass retainer nut is the 15mm centerset style, a different part.
When to replace it
The spout drips with the hot handle shut, water weeps around the handle base, or the handle turns stiff or will not shut off fully. A new cartridge restores the shutoff without replacing the faucet.
Specifications
| FourHome part | 4H1315117H |
|---|---|
| UPC | 850054895615 |
| Side | Hot |
| Overall length | About 2-3/4 in. |
| Valve | Quarter-turn ceramic disc |
| Construction | Black plastic body, brass-tipped splined stem |
| Certification | NSF/ANSI/CAN 372 lead free, IAPMO R&T |
What is in the box
- 1 hot cartridge
- Black spline cap
- Handle, bonnet and trim not included
How to install it
Time: About 20 minutes. Tools: Screwdriver, Adjustable wrench.
- Shut both supply stops under the sink and open the faucet to bleed pressure.
- Remove the hot handle and the bonnet over the valve.
- Unthread the old cartridge by its hex and lift it out.
- Drop the new cartridge in with the spline cap aligned and thread it down snug. Do not overtighten.
- Refit the bonnet and handle, open the stops and test the hot side for a full shutoff.
Questions
Will this fit the cold side?
No. The hot and cold cartridges on this faucet are not interchangeable because the ceramic disc clocking is different. The cold side takes the replacement for Kohler GP1092203, sold separately.
Is there a hot and cold pair?
Yes. FourHome sells a matched pair, the replacement for Kohler GP1092204 and GP1092203, to rebuild both sides in one visit.
Is it lead free?
Yes. It is certified by IAPMO R&T to NSF/ANSI/CAN 372, the lead-free standard for faucets that deliver drinking water.
How do I know my faucet takes this cartridge?
Check your model number against the list above and that the faucet was built after January 1, 2012. The old cartridge has a black plastic body and a brass-tipped stem.
Related parts
Repair guides
FourHome is not affiliated with or endorsed by any faucet manufacturer. Brand names and part numbers are used only to identify compatibility.