Pfister 910-374 Replacement Hot and Cold Stem
Compression stem for the hot or cold side of Price Pfister two-handle and three-handle tub and shower valves. 5-3/16 in. brass, 12-point broach.
Replaces these part numbers
| OEM part numbers | Aftermarket equivalents |
|---|---|
| Pfister 910-374 Pfister 910-013 Pfister 910-3740 Pfister 910-0130 | Danco 9H-3D |
Will it fit?
Fits
- Price Pfister Crown Imperial two-handle and three-handle tub and shower valves
- Price Pfister Verve two-handle and three-handle tub and shower valves
- Hot or cold position (right-hand thread serves both)
Not compatible with
- The center diverter on a three-handle valve (Pfister 910-382)
- Single-handle Pfister faucets
- Pressure-balance valves
- Ceramic disc cartridges
Is this your part?
Back one stem out and measure it. The right part is solid brass, 5-3/16 in. end to end, with twelve splines on the broach that carries the handle. A compression stem rises and falls through several turns. If yours turns only a quarter turn in place, or is plastic, you have a cartridge valve instead.
When to replace it
The tub spout drips with the handles closed, the showerhead trickles after shutoff, or the handle will not stop the water no matter how hard you turn it. Worn stem threads and a tired washer face cause it.
Specifications
| FourHome part | 4H2615651J |
|---|---|
| UPC | 850054895059 |
| Overall length | 5-3/16 in. |
| Broach | 12-point |
| Thread | Right-hand |
| Material | Brass |
| Pieces | 1 stem |
What is in the box
- 1 brass compression stem
- Seat washers and bibb seats not included
How to install it
Time: About 15 minutes. Tools: Screwdriver, Deep stem socket or stem wrench.
- Shut off the supply and open the valve to bleed pressure.
- Remove the handle screw and handle.
- Back the old stem out with a deep stem socket or stem wrench. Pliers round off the flats.
- Check the bibb seat with a flashlight and replace it if it is grooved or pitted.
- Thread the new stem in until snug.
- Refit the handle and test for drips.
Questions
Does one stem work on both hot and cold?
Yes. The right-hand thread serves either position. Order two to do both sides.
Does it fit the middle handle?
No. The center handle takes the Pfister 910-382 diverter stem.
Why does it still drip after a new stem?
The washer is closing on a worn bibb seat. Replace the seat in the same visit.
Are seats included?
No. Pfister 970-500 bibb seats are sold separately.
Related parts
FourHome is not affiliated with or endorsed by any faucet manufacturer. Brand names and part numbers are used only to identify compatibility.