Home ›
Parts › American Standard › Faucet Stems
Replacement for American Standard 50772-0700 Short Colony Diverter Stem
Center diverter stem for American Standard Colony short pattern three-handle tub and shower valves. About 5-1/8 in. brass with a 16-point broach.
FourHome 4H480000 · UPC 850054895783 · ASIN B0HJRY2YYB
$19.98
Amazon price as of 2026-09-23. Current price is on Amazon.
Buy on AmazonBuying 10 or more? Volume pricingRestocking on Amazon. Check the listing for current availability.
ReplacesAmerican Standard 50772-0700, 50772-07, 50718-07
PositionCenter diverter, short pattern Colony
LengthAbout 5-1/8 in. overall
Broach16-point
FittedO-ring, seat washer and brass screw
Replaces these part numbers
| OEM part numbers | Aftermarket equivalents |
|---|
American Standard 50772-0700 American Standard 50772-07 American Standard 50718-07 | Danco 11C-1D (15702B) Everbilt 84998 Kissler 11-1522 |
Will it fit?
Fits
- Center diverter on American Standard Colony short pattern three-handle tub and shower valves
- Valves that use 50729-0700 short pattern hot and cold stems on each side
Not compatible with
- Long pattern diverter 72856-0700 (5-13/16 in.)
- Hot or cold stems 50729-0700 and 72855-0700
- Transfer valve cartridge M950070-0070A
- Washerless diverters
Is this your part?
Pull the center handle stem and look for a 16-point broach, a threaded brass bonnet, a black O-ring and a seat washer held by a brass screw, about 5-1/8 in. overall. Short pattern trim uses a short escutcheon sleeve.
When to replace it
Water keeps running from the tub spout with the shower on, the shower will not hold, shower flow is weak, or the center handle drips. A worn diverter stem or seat washer is the usual cause.
Specifications
| FourHome part | 4H480000 |
|---|
| UPC | 850054895783 |
|---|
| Overall length | About 5-1/8 in. |
|---|
| Broach | 16-point |
|---|
| Materials | Solid brass stem and bonnet, rubber O-ring and seat washer |
|---|
What is in the box
- 1 diverter stem with O-ring, seat washer and screw
- Seat, sleeve, escutcheon and handle not included
How to install it
Time: About 15 minutes. Tools: Tub bonnet socket, Screwdriver.
- Shut off the water and open the tub spout to drain the lines.
- Pry off the index cap and remove the handle screw, handle, sleeve and escutcheon.
- Turn the bonnet counterclockwise with the socket to back out the old stem.
- Inspect the brass seat and renew it if pitted. A new stem on a worn seat keeps sending water to the spout.
- Thread in the new stem and snug it with the socket.
- Refit the trim and check that the shower holds with no flow from the spout.
Questions
Why does water still come from the spout after I changed the stem?
The brass seat is usually worn. A new stem sealing on a pitted seat keeps sending water to the spout.
Does it fit long pattern Colony valves?
No. Long pattern valves take the 5-13/16 in. 72856-0700 diverter.
What about the hot and cold stems?
They are separate parts. FourHome sells the replacement for American Standard 50729-0700 short pattern stem.
FourHome is not affiliated with or endorsed by any faucet manufacturer. Brand names and part numbers are used only to identify compatibility.