Home › Parts › Kohler › Faucet Stems

Replacement for Kohler 20868 Diverter Stem

Center diverter stem for Kohler three-handle tub and shower valves in the 10616 and 10620 series. 5.4 in., Z broach, ships with a brass seat.

FourHome 4H2615114 · UPC 850054895301 · ASIN B0D9Q9QD53
Replacement for Kohler 20868 Diverter Stem
Replacement for Kohler 20868 Diverter Stem image 1Replacement for Kohler 20868 Diverter Stem image 2Replacement for Kohler 20868 Diverter Stem image 3Replacement for Kohler 20868 Diverter Stem image 4Replacement for Kohler 20868 Diverter Stem image 5Replacement for Kohler 20868 Diverter Stem image 6
$28.98
Amazon price as of 2026-09-23. Current price is on Amazon.
Buy on AmazonBuying 10 or more? Volume pricing
In stock on Amazon, ships Prime
ReplacesKohler 20868 and 20868-CP
ValvesKohler 10616 and 10620 three-handle
Length5.4 in. overall, 1 in. body
BroachZ, ID length 11
KitStem plus brass seat

Replaces these part numbers

OEM part numbersAftermarket equivalents
Kohler 20868
Kohler 20868-CP
Danco 11Z-9D (17150B)
Royal Brass 1047

Will it fit?

Fits

  • Center diverter position on Kohler three-handle tub and shower valves, 10616 and 10620 series

Not compatible with

  • Hot and cold positions on the same valve (they take a C broach stem)
  • Kohler Rite-Temp pressure balance valves
  • Kohler MasterShower thermostatic valves
  • Single-handle or two-handle Kohler valves
  • Non-Kohler valve bodies

Is this your part?

Pull the center stem and look for the 20868 stamp on the brass body, or measure it: 5.4 in. overall, 1 in. across the body, a Z broach at the handle end and an ID length of 11. A C broach means you pulled a hot or cold stem.

When to replace it

The tub spout keeps running while the showerhead is on, the showerhead comes out weak because the spout never fully closes, or the center handle has gone stiff, gritty or sloppy.

Specifications

FourHome part4H2615114
UPC850054895301
Overall length5.4 in.
Body diameter1 in.
BroachZ, ID length 11
MaterialsSolid brass body, stainless internal pin, EPDM seal washer

What is in the box

How to install it

Time: 15 to 25 minutes. Tools: Deep-well stem socket, Seat wrench, Adjustable wrench.

  1. Shut the water to the bath.
  2. Pull the center handle, screw and escutcheon.
  3. Back the old stem out with a deep-well stem socket.
  4. Pull the old seat with a seat wrench and set the new one. A pitted seat chews a fresh washer down within months.
  5. Thread the new stem in hand-tight, then snug it with the socket.
  6. Run the spout, engage the diverter and check the spout stops before the trim goes back on.

Questions

Is the seat included?

Yes. A brass faucet seat ships with the stem.

Will it fit the hot or cold handle?

No. Those positions take a shorter stem with a C broach. FourHome sells the Kohler Trend hot and cold stems separately.

Is it the same repair as Danco 11Z-9D?

Yes, and this one includes the seat.

Related parts

Repair guides

FourHome is not affiliated with or endorsed by any faucet manufacturer. Brand names and part numbers are used only to identify compatibility.